SV-JME is indexed / abstracted in:

  • SCI-Expanded,
  • Compendex,
  • Inspec,
  • ProQuest-CSA,
  • SCOPUS,
  • TEMA, ...
The list of the remaining bases, in which SV-JME is indexed »

Founders and Publishers

University of Ljubljana, Faculty of Mechanical Engineering

University of Maribor, Faculty of Mechanical Engineering

 

Association of Mechanical Engineers of Slovenia

 

Chamber of Commerce and Industry Slovenia, Metal Processing Association

Editorial Office

University of Ljubljana
Faculty of Mechanical Engineering
Journal of Mechanical Engineering
Aškerčeva 6,

SI-1000 Ljubljana
Slovenia

P: +386 1 4771 137
E: info@sv-jme.eu


The magazine is subsidized by the Slovenian Book Agency (JAK).

 

Journal of Mechanical Engineering - Volume 2009

   

SV - JME 55 (2009)12

Table of contents

  1. Theory and Application of Naturally Curved and Twisted Beams with Closed Thin-Walled Cross Sections
  2. An Approach to the Optimization of a Thin-walled Z-beam
  3. An Analytical Solution of the Navier-Stokes Equation for Flow over a Moving Plate Bounded by Two Side Walls
  4. Point Data Pre-Processing Based on Fuzzy Logic for Reverse Engineering Modelling
  5. Improvement of the Statical Behaviour of Pressure Controlled Axial Piston Pumps
  6. Diamond Tools for Machining of Granite and Their Wear
  7. Visual Control of an Industrial Robot Manipulator: Accuracy Estimation

To journal contents >>
   

SV - JME 55 (2009)11

Table of contents

  1. Modular Design and Its Application to Overhead Traveling Crane
  2. The Issue of Strouhal Number Definition in Cavitating Flow
  3. Analysis of Product Development on Large-Scale Production with Multi-Criteria Approach
  4. High Pressure Cooling in the Machining of Hard-to-Machine Materials
  5. Qaulity Audits of Management Systems
  6. Improving the Quality of Maintenance Processes by Using Information Technology
  7. Application of Optimization Techniques to Determine Parameters of the Vibe Combustion Model

To journal contents >>
   

SV - JME 55 (2009)10

Table of contents

  1. Homodyne Quadrature Laser Interferometer Applied for the Studies of Optodynamic Wave Propagation in a Rod
  2. Test and Parameters Design of a Novel Reinforced  Cymene-Si-Oil Isolator for Reinforcement Scheme of Flimsy Equipment System in Moving Conveyances
  3. Numerical Simulation of Stress Relieving of an Austenite Stainless Steel
  4. Application of 'Data Envelopment Analysis' in Ecological Research of Maintenance of Forestry Mechanisation
  5. Translation of Extended Petri Net Model into Ladder Diagram and Simulation with PLC
  6. Properties of Thermally Treated CuZn27Al3  Shape Memory Alloy
  7. The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials

To journal contents >>
   

SV - JME 55 (2009)9

Table of contents

  1. Performance Analysis of the Reheat-Stop-Valve Mechanism under Dimensional Tolerance, Misalignment and Thermal Impact
  2. Emergent Synthesis Based Multi-Objective Design of the Manufacturing System Shop-Floor
  3. Some Statistical Aspects of Firecracker Noise
  4. Reward Level Evaluation of Parallel Systems
  5. Numerical Simulation of Crack Modeling using Extended Finite Element Method
  6. The Application of the Root Locus Method for the Design of Pitch Controller of an F-104A Aircraft
  7. Intelligent Interfacing Module of Process Capability among Product and Process Development Systems in Virtual Environment

To journal contents >>
   

SV - JME 55 (2009)7-8

Table of contents

  1. Particularities of incremental forming application in multi layer construction elements
  2. Company’s Readiness For Concurrent Product And Process Development
  3. An Investigation of the Effect of theNumber of Inserts on the Machining Time and Metal Removal Rate During the Milling of AISI D3 Steel at High Cutting Speeds
  4. Automatic Detection of Spring Faults During Assembly of Reciprocating Compressors
  5. Function and Functionality in the Conceptual Design Process
  6. Uniform Power Transmission Gears
  7. Model-Based Investigation of Flight Qualities: the Theory and Practice of Full-Scale Aircraft Modelling
  8. Modelling and analysis of thermal and stress loads in train disc brakes – braking from 250 km/h to standstill

To journal contents >>
   

SV - JME 55 (2009)6

Table of contents

  1. A Reverse Engineering Technique for Creating Virtual Robots
  2. Internet Based Teleoperation for Cooperative Navigation and Manipulation
  3. A Novel Pelton Turbine Model for Water Hammer Analysis
  4. Availability Management of Complex Technical Systems
  5. Variation of Normal Anisotropy Ratio „r” during Plastic Forming
  6. Research on the Influence of the Cutting Speed on the Specific Cutting Force During Turning
  7. STEP-NC: A New Programming Code for the CNC Machines

To journal contents >>
   

SV - JME 55 (2009)5

Table of contents

  1. Spatial-Mode-Shape Identification using a Continuous Wavelet Transform
  2. Experimental Investigations and Modeling of the Rubber-Asphalt Sliding Pair Dynamics
  3. Basic Quality Tools in Continuous Improvement Process
  4. The Influence of Some Parameters on the Flow Properties of Bulk Solids
  5. Phenomenological Sedimentation Model for an Industrial Circular Settling Tank
  6. Magnetic Cooling - Development of Magnetic Refrigerator
  7. Measurement Uncertainty in Calibration of Measurement Surface Plates Flatness

To journal contents >>
   

SV - JME 55 (2009)4

Table of contents

  1. Quantification of Flow Kinematics Using Computer-Aided Visualization
  2. Mathematical Modeling and Experimental Research of Characteristic Parameters Hydrodinamic Processes of a Piston Axial Pump
  3. Enhancing Gesture Dictionary of a Commercial Data Glove Using Complex Static Gestures and an MLP Ensemble
  4. Determination of Pressure Losses in Hydraulic Pipeline Systems by Considering Temperature and Pressure
  5. Boundary Layer of Dissociated Gas on Bodies of Revolution of a Porous Contour
  6. Integration Framework to Support Cooperation in Product Development Process
  7. Using Balanced Scorecard to improve Environmental Management System

To journal contents >>
   

SV - JME 55 (2009)3

Table of contents

  1. Sound Emitted at Boundary Layer During Steel Quenching
  2. Simulation of Quenching Treatments on Bearing Components
  3. Distortion Control via Optimization of Cooling Process and Improvement of Quench Oils
  4. Prediction of Unavoidable Distortions in Transformation-Free Cooling by a Newly Developed Dimensionless Model
  5. Measurement and Database Construction of Heat Transfer Coefficients of Gas Quenching
  6. Flow Control in Gas Pressure Quenching for Reducing Distortion Potential
  7. Optimization of CVT Pulley Quenching Process Through Quenching Simulation

To journal contents >>
   

SV - JME 55 (2009)2

Table of contents

  1. Dynamic Equipment Deployment at a Container Terminal: Transfer System Based on Real-Time Positioning
  2. Morphological - Functional Aspects of Electro-Discharge Machined Surface Textures
  3. Dynamic Response of Mobile Elevating Work Platform under Wind Excitation
  4. The Influence of Hardening Related Deformations on Selection of Abrasion Inhibition Process
  5. Risk Assessment and Managing Technical Systems in case of Mining Industry
  6. Functional and Information Modeling of Production Using IDEF Methods
  7. Effects of Couple Stresses on the Unsteady Performance of Finite Lubricated Bearings

To journal contents >>
   

SV - JME 55 (2009)1

Table of contents

  1. Cylindrical wormgearings with progressively curved shape of teeth flanks
  2. Condition Monitoring of Milling Tool Wear based on Fractal Dimension of Vibration Signals
  3. Mathematical Modeling and Experimental Verification of Operating Parameters of Vane Pump With Double Effect
  4. The Integrating Role of Simulation in Modern Manufacturing Planning and Scheduling
  5. A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry
  6. Application of Artificial Neural Network for Modeling the Flash Land Dimensions in the Forging Dies
  7. Optimization of the Unloading Bridge Working Cycle

To journal contents >>
   


Sign up for the FREE SV-JME Newsletter

Enter your email address below to receive your newsletter subscriptions.
Name and surname:

E-mail:
Subscribe
Unsubscribe