Articles in press (Uncorrected proof)

Global Criterion Method based on Principal Components to the Optimization of Manufacturing Processes with Multiple Responses

José Henrique de Freitas Gomes – Aluizio Ramos Salgado Júnior – Anderson Paulo de Paiva – João Roberto Ferreira – Sebastião Carlos da Costa – Pedro Paulo Balestrassi*

Date of acceptance 21.10.2011
DOI:10.5545/sv-jme.2011.136
Global Criterion Method based on Principal Components to the Optimization of Manufacturing Processes with Multiple Responses (.pdf 226KB)

Computation Method in Failure Analysis of Mechanical Fastened Joints at Layered Composites

Ivana Ilić - Zlatko Petrovic - Mirko Maksimović - Slobodan Stupar- Dragi Stamenković*

Date of acceptance 21.10.2011
DOI:10.5545/sv-jme.2010.157
Computation Method in Failure Analysis of Mechanical Fastened Joints at Layered Composites (.pdf 139KB)

Increased Efficiency of Hydraulic Systems Through Reliability Theory and Monitoring of System Operating Parameters

Mitar Jocanović* - Dragoljub Šević – Velibor Karanović – Ivan Beker – Slobodan Dudić

Date of acceptance 21.10.2011

DOI:10.5545/sv-jme.2011.084
Increased Efficiency of Hydraulic Systems Through Reliability Theory and Monitoring of System Operating Parameters (.pdf 600KB)

Gear Unit Housing Effect on the Noise Generation Caused by Gear Teeth Impacts

Milosav Ognjanović - Snežana Ćirić Kostić*

Date of acceptance 21.10.2011
DOI:10.5545/sv-jme.2010.232
Gear Unit Housing Effect on the Noise Generation Caused by Gear Teeth Impacts (.pdf 153KB)

Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies

Tomaž Šolc – Aneta Stefanovska – Trevor Hoey – Matjaž Mikoš*

Date of acceptance 21.10.2011
DOI:10.5545/sv-jme.2010.215
Application of an Instrumented Tracer in an Abrasion Mill for Rock Abrasion Studies (.pdf 523KB)

Low-Frequency Sonoporation in vitro: Experimental System Evaluation

Jure Jelenc - Jože Jelenc - Damijan Miklavčič - Alenka Maček Lebar*

Date of acceptance 21.10.2011
DOI:10.5545/sv-jme.2011.172
Low-Frequency Sonoporation in vitro: Experimental System Evaluation (.pdf 241KB)

Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization

Mohsen Mahdavi Adeli - Faramarz Sobhnamayan - F. Sarhaddi* - Said Farahat - M. A. Alavi

Date of acceptance 21.10.2011
DOI:10.5545/sv-jme.2010.007
Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization (.pdf 389KB)

Experimental Analysis of the Impact of Particles on the Cavitating Flow

Boštjan Gregorc ‒ Andrej Predin ‒ Drago Fabijan ‒ Roman Klasinc

Date of acceptance 21.10.2011
DOI:10.5545/sv-jme.2011.062
Experimental Analysis of the Impact of Particles on the Cavitating Flow (.pdf 497KB)

Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus

Anton Bergant - Arno Kruisbrink - Francisco Arregui

Date of acceptance 14.9.2011
DOI:10.5545/sv-jme.2011.032
Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus (.pdf 449KB)

Scheduling for a Single-Terminal Intermodal System Recovery with Poisson Arrivals

Nikola Marković, Paul Schonfeld

Date of acceptance 5.9.2011
DOI:10.5545/sv-jme.2010.268
Scheduling for a Single-Terminal Intermodal System Recovery with Poisson Arrivals (.pdf 222KB)

Correlation between Incident Angle, Measurement Distance, Object Colour and Number of Acquired Points at CNC Laser Scanning

Nikola Vukašinović – Janez Možina – Jožef Duhovnik

Date of acceptance 26.7.2011
DOI:10.5545/sv-jme.2011.053
Correlation between Incident Angle, Measurement Distance, Object Colour and Number of Acquired Points at CNC Laser Scanning (.pdf 335KB)

Dynamic 1D model of an Active Magnetic Regenerator: a parametric investigation

G. Tagliafico - F. Scarpa - L.A. Tagliafico

Date of acceptance 15.7.2011
DOI:10.5545/sv-jme.2010.112
Dynamic 1D model of an Active Magnetic Regenerator: a parametric investigation (.pdf 274KB)

Retrieved Features of 2D and 3D Models from CAD as Decision Support for Production Time/Cost Estimation

Predrag Cosic - Drazen Antolic

Date of acceptance 18.1.2011
DOI:10.5545/sv-jme.2009.186
Retrieved Features of 2D and 3D Models from CAD as Decision Support for Production Time/Cost Estimation (.pdf 454KB)